Front Lock Motor

Before starting work, see CHA. Preparations Before Work. Procedures

CHE3 Removal of Motor, Front Lock:





- Move the hood to the position shown in the image.
- Ignition off.
- Make a note of any radio code.
- Disconnect the battery negative lead.





Remove:
- compartment cover from hood for front lock motor.
- connector.
- 2 nuts from lock motor.

NOTE: Hold motor up with tool to avoid splitting rubber motor supports.

- Turn motor and pull out drive wires from lock.
- Remove drive wires located in spline joint.

Remove motor.

CHE4 Installation of Motor, Front Lock:
Install in reverse order.