Checking Cables

Checking Cables







For left-hand drive cars:
Check the cable between VGLA control module terminal #A18 and the gray lock unit connector terminal 1. Check for an open-circuit. See Checking wiring and terminals - Permanent faults.

For right-hand drive cars:
Check the cable between VGLA control module terminal #A18 and the gray lock unit connector terminal 4. Check for an open-circuit. See Checking wiring and terminals - Permanent faults.

Checking Wiring and Terminals - Permanent Faults

Were any faults found in the cable?

Yes - Verification

No - Replacing the Component