Checking Door Switch Circuits

Checking Door Switch Circuits







Hint: To determine which circuit is faulty, carry out the following:

- Ignition off.
- Expose VGLA control module.
- Disconnect VGLA control module.

For passenger door circuit: connect an ohmmeter between VGLA control module #B5 and ground.
For left rear door circuit: connect an ohmmeter between VGLA control module #B6 and ground.
For right rear door circuit: connect an ohmmeter between VGLA control module #B7 and ground.
The doors must be closed when the reading is taken.


NOTE: The ohmmeter should read infinite resistance.


If the passenger door circuit displays an incorrect value select alternative 1. If the left rear door circuit displays an incorrect value select alternative 2. If the right rear door circuit displays an incorrect value select alternative 3.

1 - Checking Door Switch In Passenger Door

2 - Checking Door Switch In the Left Rear Door

3 - Checking Door Switch In Right Rear Door