Keyless Entry Module: Testing and Inspection

Programming new control module

Checking the programmed values
It is vital that the programming of the old control module is read off before replacing it.
This is done in VIDA car communication under the title Reading off Programmed Values.
Read off and make a note of the programmed values.
Program this data back into the new control module.

Continue - Ordering software

-------------------------------------------------

Ordering software

Caution! Software must be ordered to be able to program the new control module.

Order appropriate software. Programming and Relearning


Continue - Programming new control module

-------------------------------------------------

Programming new control module

Caution! The new control module can be programmed when the software is available.

For information about lock and alarm functions, see Diagnostic functions Description and Operation.
Program the control module for C 70 .


Continue - DONE

-------------------------------------------------