TCM-012C

Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reconnect the connectors, reinstall components etc.
- Raise the car so that the drive wheels are unimpeded.
- Start the car.
- Move the gear selector to position D and accelerate so that the speed exceeds 50 km/h.
- Brake the wheels and let the engine run at idling speed without touching the accelerator pedal (AP). The neutral check should display "Active" status (this may take up to 30 seconds).
- Brake the wheels, move the gear selector to position D. Carefully depress the accelerator and check that the neutral check changes to the "Inactive" status.
Check that the function operates in gear positions 4, 3 and 2.





Is transmission function OK ?

Yes - VERIFIED

No - VERIFICATION FAILED

-------------------------------------------------