Faulty Signal. Intermittent Fault

Faulty signal. Intermittent fault

Checking the connector




- Ignition off.




Check the seat belt buckle connector for intermittent contact resistance and oxidation according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
If nothing faulty was detected, try a new seat belt buckle.

Other information
- To access / replace the seat belt buckle connector, see Seat belt Service and Repair.

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Checking the connector

-------------------------------------------------