Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
Diagnostic trouble code (DTC) ROP-427 is stored if the voltage in the wiring circuit is too low for longer than 3 seconds.

Possible source
- Open-circuit or short-circuit to ground in the cable or in the connectors between the combined instrument panel and the control module.
- The bulb of the ROPS warning lamp has failed.

Fault symptom[s]
- The ROPS warning lamp did not light with the ignition switched on (open-circuit).
- If there is a short-circuit to ground the ROPS warning lamp lights.