Transit Safety Catch

Transit safety catch

Transit safety catch
The transit safety catch can be set to prevent deployment of the roll-over bars if the car is being transported in such a way that will involve the car leaning further than the specified angle for deployment. The transit safety catch can be deactivated via VCT 2000.
Deactivate the transit safety catch.





Continue - Verification

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair, check that the fault has been remedied.




- Ignition on.
Read off the transit safety catch.





Is the transit safety catch deactivated?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFIED - FAULT FOUND

VERIFICATION FAILED - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Transit safety catch

-------------------------------------------------