Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
Motor 3 controls seat height at the rear edge of the seat. If the control module receives a signal from the potentiometer that motor 3 is operating, even though the control button for seat rear height adjustment is not being activated, then diagnostic trouble code (DTC) PSL/PSR-132 is set.

Possible source




- Wiring to motor 3 incorrectly connected.
- Wiring to potentiometer 3 incorrectly connected.
- Wiring pinched or damaged.
- Defective control module.

Fault symptom[s]
- The seat moves at the rear edge when forward/backward adjustments are being made or when the front edge is being adjusted.
- The rear edge of the seat moves only a short moment before automatic shutdown occurs.