Signal Too High. Intermittent Fault

Signal too high. Intermittent fault

Checking cables
Check the signal cable between control module #B44 and air conditioning (A/C) relay 4 for an intermittent short-circuit to supply voltage according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.

Other information
- To connect the breakout box/access the control module, see Connecting the breakout box, B5234T9, B5244T7 Connecting The Breakout Box.
- To access/replace the air conditioning (A/C) relay, see Integrated relay/fusebox, engine compartment, replacing Integrated Relay/Fusebox, Engine Compartment, Replacing.
- For information about signals, see Signal specification Signal Specifications.














Continue - Fault-tracing information
DONE

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Checking cables

FAULT FOUND - DONE

-------------------------------------------------