Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




If the control module receives a signal from the outside temperature sensor corresponding to a temperature lower than -39°C (-38.2°F) (low signal) or higher than +129°C (264.2°F) (high signal) the control module interprets it as a fault and ECM-1100 is stored.

Substitute value
The values from the engine intake air temperature (IAT) sensor.

Possible source

Signal too high:
- short-circuit to ground in the signal cable
- faulty outside temperature sensor

Signal too low:
- open-circuit in the signal cable
- short-circuit to supply voltage in the signal cable
- faulty outside temperature sensor
- contact resistance in terminals

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit