Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




When self-adjustment is activated the control module runs the motors to their limit positions in order to determine the limit position. A diagnostic trouble code (DTC) is stored if the control module detects that a damper motor has not reached its limit position:
- ECC-422 Driver's side temperature damper motor self-adjustment
- ECC-423 Passenger side temperature damper motor self-adjustment
- ECC-424 Air distribution damper motor self-adjustment
- ECC-425 Recirculation damper motor self-adjustment
depending on damper motor.

Note! A new control module automatically carries out self-adjustment when vehicle speed exceeds 30 km/h for more than 15 seconds for the first time, unless self-adjustment has been activated with the Volvo on-board diagnostic (OBD) system. On old control module self-adjustment can only be carried out with the Volvo on-board diagnostic (OBD) system.

Substitute value
None.

Possible source
- Damper motor blocked.
- Damper motor not correctly installed.

Fault symptom[s]
- The orange indicator LED in the REC and air conditioning (A/C) buttons flashes for approximately 20 seconds.