Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
If there is no signal from the micro-switch for the front latch arm (front position) the motor for front locking will continue to run against a mechanical stop. Diagnostic trouble code (DTC) CCU-317 is stored for motor overload.

Possible source
- No signal from the micro-switch
- Short-circuit to supply voltage in the signal cable
- The position strip and micro-switch front latch arm are incorrectly adjusted.

Fault symptom[s]
- Convertible top control does not function.

Hint: The locking arm runs too far into the A-post. A knocking sound is heard.