Signal Too High. Intermittent Fault

Signal too high. Intermittent fault

Checking the charging system
The control module has previously registered too high a voltage. This may have been caused by the connection of a battery charger with incorrect voltage to the battery, or by an intermittent fault in the charging regulator.
Check the charging system for low charge voltage.
Remedy as necessary.





Continue - Fault-tracing information
DONE

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

FAULT-TRACING FAILED - DONE

Attempt New Test - Checking the charging system

-------------------------------------------------