Faulty Signal. Intermittent Fault

Faulty signal. Intermittent fault

Checking cables
Check the wiring between fuse 4 in the integrated relay/fusebox in the engine compartment and control module #9 and between fuse 4 and the battery for an intermittent open-circuit according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.

Other information:
- To connect the breakout box, see Connecting the ABS breakout box Connecting the ABS Breakout Box.













Select Continue when the fault has been remedied.

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Checking cables

-------------------------------------------------