Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




The control module can register diagnostic trouble code (DTC) ABS-0075 for a number of different fault causes. The diagnostic trouble code (DTC) ABS-0075 is stored:
- if there is a short-circuit to ground or open-circuit in the control module inlet or outlet valve circuits.
- if the control module is subject to interference so that its calculations are incorrect.
- if the control module registers a fault in its internal inlet and outlet valve circuits.
- if there is a short-circuit to ground, short-circuit to supply voltage or an open-circuit in the inlet valve in the anti-spin circuit.
- if the control module registers an open-circuit or short-circuit in one of its internal circuits.

Substitute value
- ABS system is blocked.
- TRACS system is blocked (cars equipped with TRACS only).
- Anti-spin function is blocked.
- The EBD function is disengaged.

Possible source
- Contact resistance in terminals.
- Interference that has affected control module calculations.
- Internal fault in control module.

Fault symptom[s]
- ABS warning lamp lit.
- Anti-spin warning lamp lit.
- Brake circuit not functioning, warning lamp lit.
- No ABS function.
- No TRACS system (cars equipped with TRACS only).
- Anti-spin does not function.