Internal Fault. Intermittent Fault

Internal fault. Intermittent fault

Intermittent fault
Check the wiring between the positive terminal on the battery and transmission control module (TCM) #9 for an intermittent open-circuit according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.

Other information:
- To connect the breakout box, see Connecting the ABS breakout box Connecting the ABS Breakout Box.
- To disconnect ABS control module connector, see Replacing the control module Service and Repair.
- For other values, see Signal specification, ABS control module Signal Specification, ABS Control Module.









Continue - DONE Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Intermittent fault

-------------------------------------------------