Checking the Control Module and Transmission Version

Checking The Control Module And Transmission Version







- Ignition on.
- Read off the part number (P/N) of the control module (software).
- Read off the transmission P/N.

Compare the software and transmission P/Ns with the engine specifications. Check that these correspond. If the control module or software does not correspond, replace with the correct version.

Select an option:
1. The P/Ns correspond.
2. The transmission P/N does not correspond.
3. The software P/N does not correspond.

1. Continue with Next Procedure. Refer to Checking The Adjustment Of The Gear-Shift Position Sensor - I.
2. Refer to Replacing the Transmission. Replacing the Transmission
3. Refer to Ordering Software. Ordering Software