Shift Indicator - A/T: Service and Repair

AI10 Preparations for Replacing Bulb in the Automatic Transmission Position Indicator:





NOTE: For type of bulb, Specifications

- Ignition off.
- Set parking brake.
- Remove tunnel compartment (center console).

AI11 Replacing Bulb in Automatic Transmission Position Indicator:





- Pull down the bulb holder at the side of the gear selector and disconnect connectors.

NOTE: The bulb and holder are a unit and cannot be separated.

- Replace the bulb.
- Reinstall bulb holder.
- Reinstall center console. Take care not to scratch interior.
- Connect connectors.
- Check that bulb lights.
- Screw center console into place and reinstall cover.