Faulty Signal. Intermittent Fault

Intermittent Fault







Check wiring between control module #A41 and #A59 and speed sensor for an intermittent open-circuit according to Checking wiring and terminals. Intermittent faults , an intermittent short-circuit to ground according to Checking wiring and terminals. Intermittent faults, an intermittent short-circuit to supply voltage according to Checking wiring and terminals. Intermittent faults and contact resistance and oxidation according to Checking wiring and terminals. Intermittent faults.

Remedy as necessary.

Other Information:
- To connect the breakout box, see Connecting breakout box, Transmission control module (TCM).
- To disconnect transmission connector, see Inspecting/cable harness to solenoids.
- To check/replace speed (RPM) sensor, see Replacing transmission speed sensor.
- For information about signals, see Signal specification, Transmission control module (TCM).

Select Continue when the fault has been remedied.

Continue: Refer to Fault-Tracing Information - Intermittent Fault. Fault-Tracing Information - Intermittent Fault