Flow Fault, Intermittent

Flow fault, intermittent

Checking hoses
Check that the hose between the EVAP canister and EVAP canister shut-off valve is not blocked or pinched.
Check that the EVAP canister connector to the EVAP canister shut-off valve is not blocked.
Check EVAP canister shut-off valve and filter for dirt and deposits.
Try to activate the canister shut off valve to ensure that no malfunctions occur.









Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Checking hoses

FAULT FOUND - DONE

-------------------------------------------------