Side Flasher Lights

The side flasher cluster consists of the bulb casing, bulb-holder and bulb and connector (see image). Replace bulb casing and bulb from outside.





- Using a 0.3 mm feeler gauge, undo light casing, pushing it in from the front and pressing towards the catch (See Image).

CAUTION: To avoid damaging paint, apply a strip of tape to the side of the feeler gauge pressed against the front wing fender.

Replacing Bulb:
- Twist bulb-holder loose without undoing connector.
- Pull bulb straight out and replace.

Replacing Bulb-Holder:
- Twist bulb-holder loose and undo connector.
- Reassemble in reverse order.
- Test flashers.