Interior Light Bulbs

1A,1B,2,5,7 & 8:

3,4,6,9 & 10:

For Bulb type, Bulb Types

1A) and 1B) See A/C unit replacing Bulb. A/C Panel Bulbs

2) Remove lamp glass with a flat-blade screwdriver.

3) To remove lamp glass, insert a flat-blade screwdriver under the edge and twist.

4) Loosen lamp casing with a flat-blade screwdriver.

5) Remove lamp casing with a flat-blade screwdriver.

6) Remove ashtray and push complete panel down and out to expose upper edge. Pull panel backwards until catches release and turn it carefully sideways to enable you to pull the lamp from the lamp-holder clip. Replace lamp and reinstall panel, pushing in the bottom first, then the top. Reinstall ashtray. Also, See rear seat heater switch replacement procedure. Seat Temperature Switch

7) Front door: Pull lamp casing out with a flat-blade screwdriver and split
it by twisting the lamp holder slightly. Pull bulb straight out and replace.
Reassemble in reverse order.

Rear door: Remove lamp glass with a flat-blade screwdriver. Pull bulb straight out and replace.
Reassemble in reverse order.

8) See switch removal procedure for appropriate switch.

9) See steps Automatic Gearbox Indicator Bulb replacement and Cigarette lighter Module Replacement.

10) See Glove Compartment Bulb Replacement Procedure.