Yazaki Instrument Panel

All warning lamps in the combined instrument panel should light when the ignition is switched on. Indicator lamps should light when the relevant function is activated. Replace the bulb if lamps do not light. For the correct type of bulb, Service and Repair

Replace instrument panel bulbs from the back.
- Lift instrument panel out Service and Repair.
- Turn bulb holder a quarter turn and lift the blown bulb up.
- Replace bulb.
- Assemble in reverse order.
- Test.

Light Positions And Functions:

1 Low oil level, some markets only
2 Low washer fluid level
3 Low fuel level
4 Dipped rear light
5 Main beam
6 Spare
7 Filament monitor
8 Filament monitor, trailer, Germany only
9 Exhaust temperature
10 SRS
11 Battery charge
12 Oil pressure
13 Brake circuit fault
14 Handbrake
15 ABS
16 Gearshift indicator
17 Low coolant level
18 TRACS
19 Check engine
20 Service interval
21 Instrument lighting
22 Instrument lighting
23 Instrument lighting
24 Instrument lighting
25 Instrument lighting
26 Flashers RH
27 Flashers LH
28