Body And Frame - Specification of Undersealed Surfaces

SECTION
8

GROUP
89

NO.
806

DATE
Aug. 1996

RE:

Specification of undersealed surfaces

850

REFERENCE: TP 3239512, SECTION 8 (81, 84) BODY AND GLASS; 8501992-

Specification of undersealed surfaces

Background: Complaints are sometimes made about insufficient undersealing. Undersealing has been reduced from the following chassis no:

854: 1 167209

This Service Bulletin specifies the surfaces that are and are not undersealed.





Treated surfaces in the wheel arches

The marked areas in the wheel arches should be undersealed, (the area around the spring strut). Other components in the wheel arches are covered by the fender liners and need not be treated.





The illustration shows the rear left-hand side wheel arch.