Not Connected

WA. Diagnostic trouble code (DTC) information

Condition
The control panel is electrically coded with car model series it is intended for, 800 or 900, and which seat it is located on, left or right. There is no decoding function in the control module however. The control module interprets this as a fault that the control panel is not connected and diagnostic trouble code (DTC) PSL/PSR-424 is set.

Possible source
- The decoding function in the control module is disabled.

Fault symptom(s)
- None.
- Fault-tracing begins at WB. Not connected.

WB. Not connected

WB1: Fault-tracing information
This diagnostic trouble code (DTC) is permanent. It cannot be erased.

Then continue with:
- Operation done