Windshield Washer System Spray Nozzles

Windshield Washer System Spray Nozzles

Removal

- Press nozzle upward - arrow A - and pull out flap at rear - arrow B -.






- Remove the hose clip - 1 - in - direction of arrow - and pull the hose connections - 2 - from the spray nozzle.






- Disconnect the connector - 3 - and remove the spray nozzle - 4 -.

Installation

- Connect the connector - 3 - and attach the hose - 2 - to the spray nozzle.

- Insert the spray nozzle into the opening starting at the top until it audibly engages.

- Adjust the spray nozzles. Refer to => [ Windshield Washer System Spray Nozzles, Adjusting ] Windshield Washer System Spray Nozzles, Adjusting.