Windshield and Headlamp Washer Fluid Reservoir Filler Neck

Windshield and Headlamp Washer Fluid Reservoir Filler Neck

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Remove the bolt - arrow - and the filler tube - 2 - from its retainer - 1 -.






- Remove right front wheel housing liner..

- Remove the insulation - 2 - and pull the filler tube - 1 - out of the rubber seal in the windshield washer fluid reservoir.






- Turn the filler tube and pull it out of the guide toward the engine compartment.

Installation

Install in reverse order of removal.