Wheel Bearing Overview, 17" Suspension

Wheel Bearing Overview, 17" Suspension






1 Wheel Bearing

• Removing and Installing, refer to => [ Wheel Bearing, for 17" Suspension ] Wheel Bearing, for 17" Suspension.

2 Securing Ring

• Check for proper seating.

3 Wheel Hub

• Removing and Installing, refer to => [ Wheel Bearing, for 17" Suspension ] Wheel Bearing, for 17" Suspension.

4 Nut

• 500 Nm

• Self-locking

• Always replace if removed.

5 Tie Rod

• Conical pin must be free of grease and oil.

• If necessary, clean using dry rag, do not use cleaning agents.

• Removing and Installing, refer to => [ Tie Rod Ball Joint ] Tie Rod Ball Joint.

6 Front Speed Sensor

7 Bolt

• 8 Nm

8 Bolt

• 20 Nm

• Quantity: 3

9 Cover Plate

10 Nut

• 90 Nm

• Always replace if removed.

11 Wheel Bearing Housing

• Conical bores must be free of grease and oil.

• If necessary, clean using dry rag, do not use cleaning agents.

• Removing and Installing, refer to => [ Wheel Bearing Housing ] Wheel Bearing Housing.

• For the correct allocation, refer to the Electronic Parts Catalog (ETKA).

12 Drive Axle

• Removing and installing, refer to => [ Drive Axle Overview ] Drive Axle Overview.

• Before assembling, coat splines using assembly paste (G 052 109 A2).

13 Cable Bracket

14 Bolt

• 20 Nm

15 Bolt

• 9 Nm

16 Bracket