Steel Spring Shock Absorber Overview
Steel Spring Shock Absorber Overview
1 Plug
2 Nut
• 56 Nm
• Always replace if removed.
3 Mount Plate
• Removing and Installing, refer to => [ Steel Spring Shock Absorber ] Steel Spring Shock Absorber.
• Replace only as a complete unit.
4 Upper Spring Washer
• Removing and installing, refer to => [ Steel Spring Shock Absorber ] Steel Spring Shock Absorber.
• Note installed position. Refer to => [ Install the upper spring washer properly on the upper spring support. ] Steel Spring Shock Absorber.
5 Upper spring support
• Removing and installing, refer to => [ Steel Spring Shock Absorber ] Steel Spring Shock Absorber.
• Note installed position. Refer to => [ The end of the upper spring coil must rest on the stop of the upper spring support. ] Steel Spring Shock Absorber.
6 Boot
• Removing and Installing, refer to => [ Steel Spring Shock Absorber ] Steel Spring Shock Absorber.
• Note installed position. Refer to => [ Engage the boot with the retaining tabs of the stop cap. ] Steel Spring Shock Absorber.
7 Buffer Stop
• Removing and installing, refer to => [ Steel Spring Shock Absorber ] Steel Spring Shock Absorber
• Note installed position. Refer to => [ Engage the stop buffer in the boot
. ] Steel Spring Shock Absorber.
8 Stop Cap
• Removing and installing, refer to => [ Steel Spring Shock Absorber ] Steel Spring Shock Absorber.
9 Coil Spring
• Surface of spring coil may not be damaged.
• Note the color code. Refer to => [ Color Code on the Coil Spring ] Front Steel Spring Shock Absorber Spacer Allocation.
• Pay attention to the allocation of the spacers. Refer to => [ Front Steel Spring Shock Absorber Spacer Allocation ] Front Steel Spring Shock Absorber Spacer Allocation.
• For the correct allocation, refer to the Electronic Parts Catalog (ETKA).
• Removing and installing, refer to => [ Steel Spring Shock Absorber ] Steel Spring Shock Absorber
• Note installed position. Refer to => [ The end of the lower spring coil must rest on the stop of the lower spring support. ] Steel Spring Shock Absorber.
10 Lower Spring Support
• Removing and installing, refer to => [ Steel Spring Shock Absorber ] Steel Spring Shock Absorber.
• Note installed position. Refer to => [ The end of the lower spring coil must rest on the stop of the lower spring support. ] Steel Spring Shock Absorber.
11 Lower Spring Washer
• Removing and installing, refer to => [ Steel Spring Shock Absorber ] Steel Spring Shock Absorber.
• Note installed position. Refer to => [ Install the lower spring support properly in the lower spring washer. ] Steel Spring Shock Absorber.
12 Spacing Disc
• Note installed position. Refer to => [ Front Steel Spring Shock Absorber Spacer Installation Position ] Front Steel Spring Shock Absorber Spacer Installation Position.
• Pay attention to the allocation of the spacers. Refer to => [ Front Steel Spring Shock Absorber Spacer Allocation ] Front Steel Spring Shock Absorber Spacer Allocation.
13 Spring Plate
• Removing and installing, refer to => [ Steel Spring Shock Absorber ] Steel Spring Shock Absorber.
14 Shock Absorbers
• For the correct allocation, refer to the Electronic Parts Catalog (ETKA).
• Removing and installing, refer to => [ Steel Spring Shock Absorber ] Steel Spring Shock Absorber.