Stabilizer Bar Overview

Stabilizer Bar Overview






1 Shock Absorbers

2 Bolt

• Always replace if removed.

3 Coupling Rod

• Removing and installing, refer to => [ Coupling Rod ] Coupling Rod.

4 Nut

• 110 Nm

• Always replace if removed.

5 Nut

• 110 Nm

• Always replace if removed.

6 Bolt

• Always replace if removed.

7 Stabilizer Bar

• Removing and installing, refer to => [ Stabilizer Bar ] Stabilizer Bar.

8 Subframe

9 Rubber Mount

• Two-part on both sides of the vehicle.

• Connected to one another via retaining tabs.

• Always replace the complete bearings.

• Removing and Installing, refer to => [ Stabilizer Bar Mount ] Stabilizer Bar Mount.

• For the correct allocation, refer to the Electronic Parts Catalog (ETKA).

10 Clamp

11 Mass Damper

• Only V6 TDI

• For the correct allocation, refer to the Electronic Parts Catalog (ETKA).

12 Bolt

• 60 Nm

• M10 x 105

• Only V6 TDI

• For the correct allocation, refer to the Electronic Parts Catalog (ETKA).

13 Cover

• Only V6 TDI

• For the correct allocation, refer to the Electronic Parts Catalog (ETKA).

14 Bolt

• 60 Nm

• M10 x 62

• Quantity: 4

• Quantity: 3, only V6 TDI

• For the correct allocation, refer to the Electronic Parts Catalog (ETKA).