Right and Left Front Upper Body Vent Temperature Sensor (G385)/(G386)

Right and Left Front Upper Body Vent Temperature Sensor (G385)/(G386)

• Removal on the right side is shown. Removal on the left side is symmetrical.

Removal

- Remove the side instrument panel trim..

- Remove the fuse panel and move it to the side.

- Disconnect the harness connector from temperature sensor - 2 -.

- Turn the temperature sensor approximately 90° in the - direction of the arrow - out of air guide channel - 1 -.






Installation

- Install the temperature sensor in the reverse order.

- After completing the repair, perform the following: basic setting, refer to => [ Checking and Adjusting Components ] Checking and Adjusting Components.