Rear Center Seat Belt Latch

Rear Center Seat Belt Latch

Removing

- Turn off the ignition.

- Remove the 2/3 unit of the bench seat. Refer to => [ Bench Seats ] Bench Seats.

- Remove the 2/3 unit of the rear bench seat. Refer to => [ Rear Seats ] Rear Seats.

- Remove the inner trim of the 2/3 unit from the rear seat. Refer to => [ Inner Trims of the Rear Seats ] Inner Trims of the Rear Seats.

- Open the hooks on the lower cover with a screwdriver and disengage them from the rear seat backrest - arrow A -.

- Disengage the upper cover - 1 - from the backrest and remove in - direction of arrow B -.

- Unscrew the bolt - 1 - (50 Nm) and remove the seat belt latch - 2 -.






Installation

To install, perform the steps used in removal in reverse order.

The belt latch anti-twist mechanism - arrow - must completely engage in the seat frame prior to bolting.