Front Seat Belt Anchor

Front Seat Belt Anchor

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

- Move the seat as far forward as possible..

- Use the trim removal wedge (3409) , to carefully pry the cap - 1 - on the sides toward the outside - arrows - and remove it from the belt anchor - 3 -.






- Press the securing spring - 2 - outward using a screwdriver (max. 4 mm tip width).

- Press down the belt anchor - 3 - to the stop on the T-pin - 4 -.

- Pull the belt anchor outward off of the T-pin on the seat frame.

Installation

- To install, perform the steps used for removal in reverse order.

- After installation, check whether the securing spring - 2 - is completely engaged on the T-pin of the seat frame - 4 -.

Tug on the seat belt to make sure it is securely attached to the seat frame.