Front Belt Height Adjuster

Front Belt Height Adjuster

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

- Remove the B-pillar trims from the mounts. Refer to => [ B-Pillar Trim, Detaching and Attaching ] B-Pillar Trim, Detaching and Attaching.

- Unscrew the bolt - 1 - (50 Nm) and detach the belt relay - 2 - from the belt height adjuster.






- Remove the bolt - 1 - (20 Nm) and detach the belt height adjuster - 2 - from the mounts in the carrier plate.






Installation

- To install, perform the steps used for removal in reverse order.