Rear Lid Tail Lamps Overview

Rear Lid Tail Lamps Overview






1 - Nuts

• 3 Nm.

• For attaching the tail lamp assembly to the rear lid.

2 - Bulb Holder

• Removing and installing, refer to => [ Side Panel Tail Lamp Bulb Holder ] Side Panel Tail Lamp Bulb Holder.

3 - Left Tail Lamp Bulb 2 (M49) and Right Tail Lamp Bulb 2 (M50)

• 12V / R5W

• Checking, refer to => [ Comfort System Central Control Module (J393), Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.

4 - Left Back-Up Lamp (M16) and Right Back-Up Lamp (M17)

• 12V / W16W

• Checking, refer to => [ Comfort System Central Control Module (J393), Output Diagnostic Test Mode ] Scan Tool Testing and Procedures.

5 - Tail Lamp Housing

• Removing and installing, refer to => [ Rear Lid Tail Lamps ] Rear Lid Tail Lamps.