Side Panel Tail Lamp Bulb Holder

Side Panel Tail Lamp Bulb Holder

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Remove tail lamp assembly in side panel. Refer to => [ Side Panel Tail Lamps ] Side Panel Tail Lamps.

- Open the tabs - arrows - and remove the bulb holder - 1 - from the tail lamp housing.






To change a bulb, push it slightly into the socket and turn it to the left.






1. Brake and tail lamp bulb, 12V / P21W

2. Rear turn signal bulb: 12V, WY21W


Installation

Install in reverse order of removal. Note the following:

• Make sure all 4 tabs are latched securely when installing the bulb holder.