LED Tail Lamps

LED Tail Lamps

The tail lamps (tail, turn signal, brake and backup lamps) cannot be disassembled other than the turn signal and back-up lamps. The turn signal and back-up lamp are generated by one light bulb, which cannot be replaced individually. The remaining lighting is provided by LEDs. Malfunctioning LEDs cannot be replaced.

Depending on market requirements, the tail lamps contain the following components and have the following functions:

• Left Tail lamp (M4) and Right Tail lamp (M2)

• Left Brake Lamp (M9) and Right Brake Lamp (M10)

• Left Rear Turn Signal Lamp (M6) and Right Rear Turn Signal Lamp (M8)

• Left Back-Up Light (M16) and Right Back-Up Light (M17)

• Left Rear Side Marker Lamp Bulb (M37) Right Rear Side Marker Lamp Bulb (M38)

• Faulty tail lamp LED:

• If a single LED is faulty, the entire lamp shuts down and must be replaced.

Additional information:

Refer to the Owner's Manual.

DTC Recognition and Display

Comfort System and Vehicle Electrical System are equipped with On Board Diagnostics (OBD) which assists troubleshooting of tail light assemblies.

The "Guided Fault Finding" function is to be used for troubleshooting of the systems as described in => [ Vehicle Diagnosis, Testing and Information Systems ] Testing and Inspection.