Fog Lamp

Fog Lamp

• Illustrations depict removal and installation at left fog light.

Removal

- Turn off the ignition and all electric consumers and remove the key.

- Remove the fog lamp trim.

- Remove the bolt - 1 -, pull the fog lamp - 2 - out of its side retainers - arrows - and remove it through the opening in the body. Pay attention to the wires still connected.






- Disconnect the connector - 1 - and remove the fog lamp.






Installation

Install in reverse order of removal. Note the following:

- Tighten the screw - 1 - to 2 Nm.






- Make sure the headlamp is working correctly.

- Check the fog lamp setting and adjust if necessary.