Air Door Actuator / Motor: Description and Operation

Door Control Motors Overview

Prior to working on electrical wires, disconnect the corresponding fuse/fuses.

• A new generation of control motors is installed. These control motors no longer have a potentiometer.

• After replacement of a control motor, the address of all control motors must be adapted with the Vehicle diagnostic tester.

• For the malfunction "adaptation limit exceeded", check connecting element at motor/door, there must be no play between the shaft of the actuator motor and the connecting element.

• - A - shows the arrangement of the control motors on the left side of the heating and A/C unit.

• - B - shows the arrangement of the control motors on the right side of the heating and A/C unit.






1 Defroster Door Motor (V107)

• Removing and installing, refer to => [ Defroster Door Motor (V107) ] Defroster Door Motor (V107).

2 Left Side Vent Motor (V299)

• Removing and installing, refer to => [ Left Side Vent Motor (V299) ] Left Side Vent Motor (V299).

3 Left Vent Adjustment Motor (V110)

• Removing and installing, refer to => [ Left Center Vent Motor (V110) ] Left Center Vent Motor (V110).

4 Left Footwell Door Motor (V108)

• Removing and installing, refer to => [ Left Footwell Door Motor (V108) ] Left Footwell Door Motor (V108).

5 Left Temperature Door Motor (V158)

• Removing and installing, refer to => [ Left Temperature Door Motor (V158) ] Left Temperature Door Motor (V158).

6 Right Temperature Door Motor (V159)

• Removing and installing, refer to => [ Right Temperature Door Motor (V159) ] Right Temperature Door Motor (V159).