Upper Right Coolant Pipe

Upper Right Coolant Pipe

Removing

- Drain the coolant. Refer to => [ Coolant, Draining ] Coolant, Draining.

- Remove the upper intake manifold. Refer to => [ Upper Intake Manifold ] Upper Intake Manifold.

- Disconnect the glow plug connectors for cylinders "1" and "2".

- Free up the wiring harness on the upper right coolant pipe.

- Disconnect the electrical connector - 1 - for the engine coolant temperature sensor (on radiator outlet).






- Remove the coolant hoses, to do so, loosen the hose clamps - arrows -.

- Remove the upper right coolant pipe.

Installing

Install in the reverse order of removal. Note the following:

• Secure all hose connections using hose clamps appropriate for the model type.

- Install the upper intake manifold. Refer to => [ Upper Intake Manifold ] Upper Intake Manifold.

- Fill the coolant. Refer to => [ Coolant, Filling ] Coolant, Filling.