Brake Pedal and Brake Booster, Separating and Connecting

Brake Pedal and Brake Booster, Separating and Connecting

Special tools, testers and auxiliary items required

• Release Tool (T10159 A)

Separating

- Remove the footwell cover.

- First press brake pedal in direction of brake booster and hold.






1 Brake pedal
2 Pressure rod
3 Retaining lugs

- Insert (T 10159) and pull in direction of driver seat. When doing this, counter-hold on brake pedal. (At this moment the brake pedal must not be allowed to move backward). The mounting retaining lugs - 3 - will thereby be pressed off the ball head of the push rod - 2 -.

The process of separating the brake pedal from the brake booster is shown with the pedal assembly removed.

- Pull (T 10159) and brake pedal together toward the driver seat. (The brake pedal will thereby be pulled off the ball head of the push rod).

Connecting

- Hold the push rod ball head in front of the mount and push the brake pedal toward the brake booster until the ball head engages audibly.






• Further installation is in the reverse sequence to removal.