Brake Pedal Overview

Brake Pedal Overview

• Illustration for automatic transmission and hybrid vehicles.

The path of the brake pedal must not be shortened via extra floor mats.

• Lubricate all bearings and contact surfaces with grease (G 000 450 02).






1 Mounting Bracket for Pedal Assembly

2 Bolt

• 20 Nm

3 Support

4 Bolt

• 3 Nm

5 Pivot Pin

• Fits in only one position, opening in the mounting pin on the tab on the bracket.

6 Crash Wedge

• Removing and installing, refer to => [ Remove the crash wedge on the bracket in order to remove the bolt. ] Brake Pedal.

7 Bolt

• 3 Nm

8 Ball Socket

9 Wheel Hub Support

• For the ball head on the brake booster push rod.

10 Bushing

11 Brake Pedal

• Removing and installing, refer to => [ Brake Pedal ] Brake Pedal.

• Separate the brake pedal from brake booster. Refer to => [ Brake Pedal and Brake Booster, Separating and Connecting ] Brake Pedal and Brake Booster, Separating and Connecting.

• Clip brake pedal together with brake booster. Refer to => [ Brake Pedal and Brake Booster, Separating and Connecting ] Brake Pedal and Brake Booster, Separating and Connecting.

• Allocation, refer to the Electronic Parts Catalog (ETKA).

12 Pedal Cap

13 Bracket with Magnet

• Only on hybrid vehicles.

• Bolt, bracket to brake pedal, 3.5 Nm.

• Adjusting, refer to => [ Brake Pedal Position Sensor (G100), Adjusting ] Adjustments.

14 Brake Pedal Position Sensor (G100)

• Only on hybrid vehicles.

• Adjusting, refer to => [ Brake Pedal Position Sensor (G100), Adjusting ] Adjustments.

15 Bracket Brake Pedal Position Sensor (G100)

• Only on hybrid vehicles.

• Adjusting, refer to => [ Brake Pedal Position Sensor (G100), Adjusting ] Adjustments.

16 Bolt

• 3 Nm

• Only on hybrid vehicles.

17 Securing Ring

• For the mounting pin.