Door Components, Additional Door Seal

Additional Door Seal

Removing

• The clips - 2 and 3 - remain on the body.






Perform the following:

- Bend the lip - 5 - of the seal to the side - arrow a -.

- Press the retaining hooks of the clips - 3 - together - arrow b -.

- Remove the seal - 1 - from the clips - 3 - - arrow c -.

- In the case of the top clip - 2 -, carefully remove the seal - 1 - from the clip - arrow d -.

Installation

• Check the clips - 2 - for damage and replace them if necessary.

• Make sure the seals - 5 - are seated correctly.






Perform the following:

New seal

- Press the seal - 1 - with the clips - 6 - and seals - 5 - into the body.

Removed seal

- Press the seal - 1 - onto the damaged clips - 6 -.

• The seal - 1 - must be in direct contact with the sill seal - 3 -.