Sunroof / Moonroof Drain: Adjustments

Front Glass Sunroof Panel, Adjusting

• The glass panel height adjustment is to be performed after the glass panel has been closed out of sliding position.






Perform the following:

- Remove trim.

- Remove the seal - 5 - from the assembly frame.

- Only loosen both front left and right screws - 4 - for the front glass panel - 3 -.

- Adjust the rear glass panel - 2 - according to the dimensions.

• Dimension - a -: 1.5 +/- 1 mm

• Dimension - b - : 1 +/- 1 mm

• Dimension - c - : 1 +/- 1 mm

- Tighten the left and right screws - 4 -. Tightening specification: 7 Nm.

- Install the trim.

- Install the seal - 5 - on the assembly frame.