Operating without Electricity

Operating without Electricity

Glass Panel

• If there is a malfunction in the electrical system, the front sunroof glass panel can be moved manually using a commercially available hex wrench.

• More force will be needed since the motor is not disengaged from the drive.

• Manually move the front glass panel until its front corner is flush with the front corner of the rear glass panel. If the glass panel is moved further to the rear, the mechanism control cables can disengage.






- Remove front light and control unit.

- Insert the hex wrench in the bolt - 3 - of the sunroof motor - 2 -.

If turning by hand, more force will be needed since the motor is not disengaged from the drive.

Sun Shade

• If there is a malfunction in the electrical system, the sun shade on the sun shade motor can be moved manually using a commercially available hex wrench.

• More force will be needed since the motor is not disengaged from the drive.






- Removing headliner..

- Insert the hex wrench - 2 - in the bolt of the sun shade motor - 1 -.

If turning by hand, more force will be needed since the motor is not disengaged from the drive.