Lock Carrier, Pressure Hose and Coupling, Locking

Pressure Hose and Coupling, Locking

Perform the following:

• Make sure the clip - 2 - is in the upper position.

- Attach the pressure hose - 3 - into the coupling - 1 - in - direction of arrow -.






- Push the clip - 2 - through it all the way down.

• If the clip cannot be pushed all the way through, this mean the pressure hose is not completely attached to the coupling.

• Install the pressure hose again and lock the clip.

• Pull on the coupling to make sure it is secure.