Mirror Glass

Mirror Glass

• The following describes removing and installing the left mirror glass only. Removing and installing the right mirror glass is identical.

Wear protective eyewear and gloves when working.






Perform the following:

Removing

- Protect the housing edge against damage, e.g. with fabric-reinforced adhesive tape.

- Press the mirror glass - 1 - at the top into the mirror housing - arrow a -.

- Press the mirror glass - 1 - out of the bracket - 5 - with one of the wedges (T10383).

- Tilt the mirror glass - 1 - to the side - arrow b - and disconnect any plug contacts - 3 and 4 - on the back of the mirror glass - 1 -.

Installation

- Connect the plug contacts to the mirror glass.

- Press the center of the mirror glass onto the retainer in the housing.

The mirror glass will engage with a click.

• Then, perform a function test.