Lock Cylinder Cover Cap

Lock Cylinder Cover Cap

Removing

• Do not turn the screwdriver to pry off the lock cylinder cap.

Perform the following:






- Remove the door handle from the door.

- Gently push a small screwdriver - 3 - - arrow a - into the opening in the bottom of the lock cylinder cap.

- Remove the lock cylinder cap - 1 - with the screwdriver gently from the door and push up - arrow b -.

Installation

Perform the following:

- Place the lock cylinder cap - 2 - gently at an angle from above - arrow a - on the lock cylinder.






- Press the lock cylinder cap - 2 - on to door - arrow b - until cover cap engages with lock cylinder.