Plenum Chamber Bulkhead

Plenum Chamber Bulkhead

Removing

• The center portion of the plenum chamber bulkhead can only be removed when the two side parts are removed.






Perform the following:

For the left plenum chamber bulkhead

- Remove the bolts - 3 -.

- Lift out the left plenum chamber bulkhead - 2 - with the seal - 4 -.

For the right plenum chamber bulkhead

- Remove the bolts - 9 -.

- Lift out the right plenum chamber bulkhead - 8 - with the seal - 7 -.

For the center plenum chamber bulkhead

• The left and right plenum chamber bulkheads are removed.

- Remove the bolts - 6 -.

- Remove the hex nuts - 5 -.

- Lift out the center plenum chamber bulkhead - 1 -.

Installing

• The center plenum chamber bulkhead is installed first.

• When installing the left and right plenum chamber bulkheads, make sure the seal is seated correctly.






Perform the following:

For the center plenum chamber bulkhead

- Install the center plenum chamber bulkhead - 1 -.

- Tighten the nuts - 5 -, tightening specification: 6 Nm.

- Tighten the bolts - 6 -, tightening specification: 6 Nm.

For the left plenum chamber bulkhead

- Install the left plenum chamber bulkhead - 2 - with the seal - 4 -.

- Tighten the bolts - 3 -, tightening specification: 6 Nm.

For the right plenum chamber bulkhead

- Install the right plenum chamber bulkhead - 8 - with the seal - 7 -.

- Tighten the bolts - 9 -, tightening specification: 6 Nm.